Handheld Meter for Moisture in Oil Measurement
Oilport 30 Set
The Oilport 30 handheld meter is dedicated to portable monitoring of moisture and temperature in oil.
The simple and intuitive operation via TFT touch screen and the built-in data logging function make the Oilport 30 hand-held the ideal tool for fast and reliable oil analysis.
Measurands
- Relative water content / water activity [aw]
- Absolute water content [ppm] Temperature [°C / °F].
Oilport 30 accurately measures water activity aw and temperature T. By entering oil-specific parameters, the hand-held meter calculates water content in oil (ppm)
Probes
- Pressure-tight oil probe up to 20bar Together with the ball valve assembly set, the oil probe can be fitted and removed without interrupting the oil circuit.
- Short oil probe Ideal for quickly determining the moisture in oil samples.
Oilport 30 Set
Oilport 30 with ball valve mounting set
Short oil probe for Oilport 30
Pressure-tight oil probe for Oilport 30
Related products
EE381
EE364
Omniport 30
Downloads Oilport 30 Set
EU Declaration of Conformity
FAQ
What is the calibration for a specific oil? What are specific oil parameter?
Calibration for a specific oil is a laboratory procedure for determining the saturation curve of the oil. The saturation curved is described by two parameters (A and B). These parameters are used for setting up the moisture in oil sensor for correct calculation of the water content (ppm) out of the measured temperature and water activity (aw).
How can I replace the sensing element of the E+E MIO Sensor?
Sensor replacement is possible the EE360 models when option PC4 (pluggable probe). Please see the operation manual for detail and spare part code ordering guide.
How can I clean the sensing element of the E+E MIO Sensor?
Please see the cleaning instructions.
Can the coating be used for E+E MIO Sensor?
No, coating is not available for MIO sensors.
What kind of calibration certificate is included in the standard scope of the E+E MIO Sensors?
The standard scope of supply of E+E MIO sensorsincludes an inspection certificate according DIN EN 10204 – 3.1.
Are there different A, B parameters for mineral transformer oil from various manufacturers?
No, mineral transformer oils from different manufacturers are quite similar.. A and B parameters are the same.