Flow Sensors / Flow Meters
Thermal flow meters from E+E Elektronik measure the mass flow or standard volumetric flow of compressed air and non-corrosive gases. They are suitable for pipelines of DN15 to DN700 and enable reliable leak detection. E+E flow sensors therefore play a significant role in reducing costs.
Why E+E Flow Sensors / Flow Meters?
- They are user-friendly
E+E flow meters are easy to install thanks to their installation and service-friendly design. The sensor unit can be removed and installed for maintenance or calibration in just a few seconds.
- They provide reliable measuring results
At the heart of the E+E flow meters is a flow sensing element developed by E+E, based on the hot-film anemometer measurement principle. It has high resistance to contamination and provides long-term stable and accurate measuring results.
- They offer a high level of accuracy
The factory calibration for E+E flow meters is carried out in the typical pressure range for a compressed air network at 7 bar, which ensures a high level of measuring accuracy.
- Measurement is independent of pressure or temperature
The thermal measuring principle enables mass flow and volumetric flow measurement independently of pressure or temperature. This means that the flow sensors can be used in a wide range of pressures and temperatures.
Flow Meter Products
EE741
Modular, Compact In-line Flow Meter for DN15 to DN150
The modular in-line flow meter is dedicated for metering and monitoring of compressed air and technical gases in DN 15 to DN50 (1/2″ – 2″) pipes. Outstanding measuring accuracy due to multi-point factory adjustment at 7 bar (102 psi) air pressure.
EE771
Flow Sensor for Compresses Air and Gases
Flow sensor for Compressed Air and Gases for DN15 – 2″) and up to 16 Bar (232 psi). The measurement ball valve permits repid installation and removal with only a short interruption of the flow.
EE772
Flow Sensor for Compressed Air and Gases DN40 – DN80 / 40 Bar
Multifunctional flow sensor for DN40 – DN80 (11/2″ – 3″) and up to 40 bar (580 psi). Gauge mounting block with hot tap valve for installation and removal without interruption of the flow, Mounting possibility for pressure and dew point sensors.
EE776
Insertion Mass Flow Meter for DN50 – DN700 (2″ – 28″) and up to 16 bar (232 psi)
Insertion mass flow meter with patented non-return protection for secure mounting. Use in pipelines DN50 up to DN700 (2″ to 28″). Installation and removal without interruption of the flow.