Digital Humidity and Temperature Probe
HTP501
The digital humidity and temperature probe HTP501 is designed for use in drying chambers and other demanding industrial applications. The stainless steel probe offers excellent measurement accuracy and can be deployed in temperatures ranging from -40 to 120 °C (-40 to 248 °F). The measured values are available on the RS485 interface with Modbus RTU protocol.
HTP501 digital humidity and temperature probe
Humidity and temperature probe with Sigma 05
High measurement accuracy, easy data integration
The HTP501 measures the relative humidity and temperature in an operating range of -40 to 120 °C (-40 to 248 °F). The high-quality E+E humidity sensing element, temperature compensation and configurable pressure compensation ensure excellent measurement accuracy. In addition to the measured humidity and temperature values, the sensing probe calculates further humidity-related physical quantities such as the dew point temperature, absolute humidity or mixing ratio. The measured data are available on the RS485 interface and can be easily integrated into process control using the Modbus RTU protocol.
Optimised for harsh environmental conditions
The probe features a rugged IP66 stainless steel enclosure, a high-temperature cable with moulded M12 connector, and a choice of different filter caps. The electronics are well protected inside the probe and therefore safe from condensation and corrosion. The E+E proprietary coating protects the humidity sensing element and its leads against dust and corrosive deposits, ensuring excellent measuring performance and long-term stability in harsh conditions. An optional sensor leads protection helps to significantly extend the service life of the sensing element in particularly aggressive environments.
Flexible and extensible
Two probe lengths (200 mm and 400 mm) and three different cable lengths offer the user a huge degree of flexibility when installing the HTP501. The free PCS10 configuration software facilitates the setup and supports individual configuration of the probe. The HTP501 is compatible with the Sigma 05 sensor hub by E+E Elektronik. The digital sensing probe can be plugged into the host device based on the plug-and-play principle and thus extended to a sensor unit with display and analogue outputs.
Sigma 05 – Modular Sensor Platform
The MOP301 is compatible with the Sigma 05 host device of the E+E Modular Sensor Platform. Together they become a versatile, plug-and-play moisture in oil and temperature sensor with interchangeable probe, analogue outputs and optional display. Besides MOP301, Sigma 05 accommodates also other E+E intelligent sensing probes. See Sigma05 for further details.
Key Features
- High accuracy and wide temperature range
- High-end RH sensing element with E+E proprietary coating protection and optional cast leads
- Fully protected electronics
- Stainless steel probe in several lengths
- Flexible high temperature cable in several lengths
- Moulded M12x1 connector with standardized pin-out
- RS485 with Modbus RTU protocol
- Calculation of relevant humidity related physical quantities
- Wide choice of filter caps
Technical Data
| MEASURING RANGE HUMIDITY 0…100 % RH | ACCURACY HUMIDITY ± 1.3 %RH |
| MEASURING RANGE TEMPERATURE -40…120 °C (-40…248 °F) | ACCURACY TEMPERATURE ± 0.1 °C at 20 °C |
| OUTPUT Modbus RTU | Supply 8...35 V DC |
Downloads HTP501
Support literature
EU Declaration of Conformity